Futaba 10PX Transmitter System w/ R404SBS-E
Free Shipping
Free standard shipping on orders over $100
Covid-19 Shipping Delay Notice
Futaba 10PX Transmitter System w/ R404SBS-E
Feature:
Full color touch screen LCD
T10PX has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility.
F-4G system & telemetry
Equipped with an F-4G system that enables telemetry with faster response than the T-FHSS SR system.
10 channels
Up to 10 channels can be operated by using the S.BUS2 system together.
T-FHSS MINIZ system
By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately.
Updatable software
Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved.
Model memory for 40 models
Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
Paddle switch + bottom switch + 3 position switch
A paddle switch near the wheel, a 3-position switch on the grip, and a bottom switch on the bottom are equipped to support multiple channels and functions.
Lipo battery can be used
The optional LT2F2000B Lipo battery can be used as the transmitter power supply. The running time is extended.
Brake mixing for large cars
Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted independently.
Steering mixing
Smooth cornering is possible by the independent left and right steering servo setting.
4WS mixing for crawlers and other 4WS type
This function can be used with crawlers and other 4-wheel steering type vehicles.
Dual ESCs mixing for crawlers
ESC at the front and rear are controlled independently.
Gyro mixing
The sensitivity of Futaba car rate gyros can be adjusted from the T10PX.
Tank mixing
This function is intended for vehicles such as tanks.
CPS mixing
LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
S.BUS servo
This is a special function that allows setting of the parameters of our S.BUS servo whose settings are changed by using PC Link software.
MC-Link
This is a dedicated function which allows setting of the contents of the Link software which makes possible Futaba speed controller (ESC), MC960CR, MC950CR, MC850C, MC851C, MC602C, MC402CR, etc. variable frequency and other data changes by PC at the T10PX.
Throttle speed
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
Steering speed
When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
Non-telemetry LED
When the telemetry function is OFF to confirm that the telemetry function is not operating.
Dial select function
This function assigns functions to dials (digital trim, grip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
Switch select function
This function assigns functions to 10 switches. The operating direction can also be set.
Wheel & Trigger position can be changed
The wheel position can be offset by using an accessory APA wheel position offset adapter. The wheel angle can also be adjusted. The position of the throttle trigger can be moved forward and backward.
Rubber Grip
It is possible to convert to a narrow grip type by exchanging the rubber grip.
Trim/dial lock functions
Lock functions which prohibit setting and operation by transmitter trim, and dials are provided.
Left-handed support
The left and right installation direction of the wheel section can be reversed.
Vibrator built into the grip
The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm.
USB Port
The transmitter can be used as a game controller by connecting it to a computer with a USB cable.
- System: 10 Channels (F-4G System), 4 Channels with TFHSS-SR, T-FHSS systems
- Transmitting Frequencies: 2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP
- Protocols: T-FHSS-SR/T-FHSS/S-FHSS/F-4G
- Power Requirement: LiPo – NLF2F2000B (7.4 V) / LiFe – FT2F1700BV2 (6.6V)
- Current Drain: 350 mA or less (When the T-FHSS, Vibration off, back lighting on)
- Transmitting Antenna: 1/2λ dipole
- Model: R404SBS-E
- Futaba 10PX Transmitter System (1 pc)
- R404SBS-E Receiver (2 pcs)
- Manual
Free shipping on all Australian orders over $100
Shipping within Australia
All orders are usually dispatched within 24 Hours of Payment (excluding Saturdays, Sundays and public holidays.) All parcels are shipped from our warehouse in Melbourne, VIC, and all orders are Safe Dropped.
Regular Post:
- FREE for orders over $100
- Postage from $9.95
- 5 - 7 Business Days, up to 10 business days to Western Australia. Parcel is subject to safe drop unless requested otherwise via Australia Post or in the delivery comments. Deliver to PO Boxes, Parcel Collect and Parcel Lockers available.
- Every parcel with tracking information!
Express Post:
- Postage from $12.95
- 1 - 3 Business Days
- The Australia Post Express Next Day Network can be found by clicking here. Parcel is subject to safe drop unless requested otherwise via Australia Post or in the delivery comments.
- Every parcel with tracking information!
- Orders may require 1 business day for handling.
We don't take responsibility for orders that are lost or stolen once the parcel has been delivered to the correct delivery address.
You may experience an additional waiting period for despatch and delivery during peak periods, sale events and uncontrollable weather.
Ways to ensure you don't miss your delivery
Our deliveries with Australia Post are delivered with safe drop, meaning your parcel will be left in a secure place around your property if no-one is home. If there is nowhere safe to leave your parcel, please note this in the Delivery Comments box before checkout your order.
If you are having your parcel delivered to a work address, please ensure you include your business name and any delivery instructions (eg "Leave at Reception").
Shipping to New Zealand
Free shipping on all New Zealand orders over AUD$150
All parcels sent to New Zealand are done so through Australian Post services. We offer both standard shipping and express services. Express parcels can take up to 5 business days to arrive whereas standard can take between 6 - 12 business days. These times are reflective of metro areas only and additional days will be required for areas outside. This is excluding any delays in dispatching the order in which the customer will be notified.
Please Note: Due to COVID-19, international parcels may experience delays that are out of our hands.
The rates are weight based and will be displayed upon checkout.
The maximum weight limit is 5kg, any order over will require more than one shipment.
Please note that due to strict Airmail regulations aerosols and flammable items cannot be shipped by Air and therefore cannot be mailed overseas.
International Shipping
All international parcels are shipped through the Australia Post International services.
Please Note: Due to COVID-19, international parcels may experience delays that are out of our hands.
All parcels are subject to a 5kg weight limit and all parcels above the specified weight limit will not be able to sent out as one shipment. For parcels that exceed the weight limit, please contact us and we may be able to make arrangements for a single delivery.
Please note that due to strict Airmail regulations aerosols and flammable items cannot be shipped by Air and therefore cannot be mailed overseas.
Our international shipping rates are displayed at checkout.
Missing / Damaged Parcels
We take pride in packing our online orders to minimise any damage and ensure a clear address label is attached. Unfortunately we cannot accept responsibility for how parcels are handled once they leave our warehouse. If customers have provided the wrong address, and as a result the parcel is required to be despatched again, be aware postage charges will apply.
Dangerous Goods
Products classified as Dangerous Goods must be sent by a courier registered as dangerous goods. Dangerous goods shipments incur a surcharge which is generally around $30/parcel. This charge will be applied once we receive your order and have been given permission by you.
Not what you ordered?
We have checks in place to ensure you are sent the correct items. However, if by chance a mix up has occurred please contact us, we can organise to get the correct items to you. We will request you to send back the incorrectly shipped items, so if you hang on to the original shipping packaging, it will make it quicker and easier. Postage will be on us!
